HCC / HS15 AA69-19D629-AB AC Compressor Fits 2011 Fiesta FOMOCO 19D629-CCOEA

🔧 Part Overview: Ford Compressor AA69-19D629-AB

📌 Description

Type: HS15 air conditioning (A/C) compressor
OEM Part Number: AA69-19D629-AB (also referenced as AE83-19D629-AD, BE8Z-19703-A, FOMOCO-19D629-CC0EA)
Pulley Configuration: 6-groove serpentine belt
Voltage: 12V
Refrigerant: R-134a
Application: For use in automotive air conditioning systems; compresses and circulates refrigerant gas.

🚗 Vehicle Compatibility

The AA69-19D629-AB A/C compressor is commonly found in the following vehicles:

Ford Fiesta
- Model Years: 2011–2013
- Engine Types: 1.4L and 1.6L petrol
- Body Styles: Hatchback and sedan
Some other small Ford or Mazda vehicles in similar years may use a compatible variant, but the above is the primary fitment.

Tip: Always cross-reference the part number with your VIN or consult a parts catalog to ensure exact compatibility.

🛠️ Fixing / Replacement Process

⚠️ Warning: If you’re not experienced with A/C systems, it’s best to have a professional do this. A/C systems are under high pressure and use regulated refrigerants.

🧰 Tools and Supplies Required:

New compressor (AA69-19D629-AB)
A/C manifold gauge set
Vacuum pump
PAG oil (check exact type for your vehicle)
R-134a refrigerant
New receiver/drier or accumulator (recommended)
New O-rings
Serpentine belt tool
Torque wrench

🔄 Replacement Steps (Simplified):

Recover Refrigerant
- Use an A/C recovery machine to safely evacuate refrigerant (R-134a) from the system.
Remove Serpentine Belt
- Release belt tension and remove the belt from the compressor pulley.
Disconnect Electrical and A/C Lines
- Unplug the compressor clutch connector.
- Carefully unbolt and remove refrigerant lines (note O-ring positions).
Unbolt and Remove the Old Compressor
- Remove the mounting bolts and take out the compressor.
Install the New Compressor
- Add the correct amount of PAG oil to the new unit (if it’s not pre-filled).
- Replace O-rings with new ones lubricated with PAG oil.
- Mount and bolt down the new compressor.
Reconnect A/C Lines and Electrical Connector
Reinstall Serpentine Belt
Evacuate and Recharge the System
- Use a vacuum pump to evacuate air/moisture for 30–45 minutes.
- Recharge the system with the correct amount of R-134a.
Test Operation
- Start the vehicle and turn on the A/C.
- Check for cold air and unusual noises or leaks.

✅ Best Practices

Always replace the receiver/drier when changing the compressor.
Flush the system if the old compressor failed catastrophically (metal shavings).
Verify clutch operation and correct oil charge before closing up.
Perform a leak test using UV dye or a sniffer after the install.

🚗 Vehicle Compatibility

The AA69-19D629-AB A/C compressor is commonly found in the following vehicles:

Ford Fiesta
- Model Years: 2011–2013
- Engine Types: 1.4L and 1.6L petrol
- Body Styles: Hatchback and sedan
Some other small Ford or Mazda vehicles in similar years may use a compatible variant, but the above is the primary fitment.

Tip: Always cross-reference the part number with your VIN or consult a parts catalog to ensure exact compatibility.

Shipping, returns and warranty

Worldwide shipping with tracking
30-day returns on unused, uninstalled parts
90-day limited warranty against defects

Send us your VIN and we confirm fitment before shipping. See our shipping policy and return policy.

Hatchback

AA69-19D629-AB AC Compressor Fits 2011 Fiesta FOMOCO 19D629 CCOEA